Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
JDTfuse JFC2410-1300TS JFC2410
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- JDTfuse JFC2410-1300TS
- Type
- JDTFUSE
- Minimum package
- 1500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- JDTFUSE
- Electronic Component
- JFC2410-1300TS
- Electronic Component
- 1
- Electronic Component
- 2.5mm
- Package
- 2410
- Type
- SMD Fuse
- Electronic Component
- Non-Resettable Fuse
- Electronic Component
- 0.145g
- Electronic Component
- 6.1mm
- I2t
- 23.716
- Electronic Component
- 1
- Electronic Component
- 50A
- Electronic Component
- BM0264547817
- Operating Temperature
- 55℃~+125℃
- Voltage
- 250V
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
JFC2410-1300TS 产品概述
JFC2410-1300TS 是 JDTfuse（集电通）推出的贴片式过流保护元件，采用 2410 封装，专为电源模块与工业控制板等电子设备的短路与过流保护设计。产品通过 UL 认证，性能稳定、性价比高，适用于批量应用与工业级产品设计。
一、主要参数
- 类型：贴片式保险丝（SMD）
- 型号：JFC2410-1300TS
- 额定电流：3A
- 额定电压：250V（AC），标称额定电压 250V
- 工作温度：-55℃ ~ +125℃
- 熔断能量（I2t）：23.716（A^2s）
- 最大分断能力：50A（典型值）
- 尺寸：长 6.1 mm × 宽 2.5 mm（2410 封装）
- 认证：UL 认证
- 品牌：JDTfuse（集电通）
二、产品特性
- 小型化封装：2410 封装尺寸紧凑，便于高密度 PCB 布局与自动化贴装，适合 SMT 工艺。
- 快速且可靠的过流保护：明确的额定电流与 I2t 值，能在故障条件下迅速切断电路，保护下游元件免受毁坏。
- 宽温度适应性：-55℃ 至 +125℃ 的工作温度范围，适用于严苛工业环境与多场景温度变化。
- 良好的分断能力：50A 的分断能力可应对大多数短路条件，提高系统安全裕度。
- 通过 UL 认证：满足工业级安全规范，便于整机产品认证与市场准入。
三、典型应用场景
- 开关电源、线性电源输入侧或输出保护
- 工业控制器、PLC 与驱动板的电源与负载保护
- 通信设备、电池管理与充电系统的短路保护
- 家电控制板及消费电子设备的过流防护
四、可靠性与品质控制
JDTfuse 对材料、焊接与老化性能进行系统测试，UL 认证体现了其在安全性与一致性方面的控制能力。I2t 与分断能力数据为设计者提供了精确的安全裕度计算依据，便于在系统设计阶段进行可靠性分析与失效模式评估。
五、设计与使用建议
- 选型原则：为避免误动作与延长寿命，建议根据最大连续工作电流与启动/浪涌电流特性选择适当的额定电流，通常在最大工作电流上保留一定裕量。
- 放置位置：建议将保险丝置于电源入口或靠近被保护器件的电源引入处，减少导线与 PCB 路径上的无保护段。
- 焊接工艺：兼容常规回流焊温度曲线，建议依据厂商推荐焊接条件与 PCB 焊盘设计进行布局，确保可靠的焊接强度和热稳定性。
- 环境考量：在高温或频繁热循环的应用中，应结合使用环境评估寿命与选型裕量。
六、包装与采购
JFC2410-1300TS 支持 SMD 自动贴装的带卷包装（详情请与供应商确认），适合流水线生产与大批量采购。关于最小起订量、交期与样品申请，建议联系 JDTfuse（集电通）授权经销或技术支持获取最新信息与数据表。
总结：JFC2410-1300TS 以其小型化封装、稳定的电气性能与工业级认证，适合用于多种电源与控制板的过流保护场景，是追求可靠性与成本控制的工程项目的良好选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
