Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVT2A1R0M0405
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVT2A1R0M0405
- Type
- ROQANG
- Minimum package
- 2000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVT2A1R0M0405
- Electronic Component
- 1
- Electronic Component
- 1uF
- Package
- SMD,4x5.4mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.215g
- Electronic Component
- 1
- Electronic Component
- BM0264780415
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 8mA@120Hz
- Voltage
- 100V
- Capacitor
- 4mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVT2A1R0M0405 产品概述
一、产品简介
RVT2A1R0M0405 是 ROQANG（容强）推出的一款高压贴片铝电解电容，标称容量为 1µF，额定电压 100V，容量容差 ±20%。本器件为 SMD 封装（直径 4mm，长度 5.4mm），专为需要高耐压、小体积电容解决方案的消费电子和工业电路设计，提供稳健的低频滤波与储能功能。
二、主要技术参数
- 容量：1µF
- 容差：±20%
- 额定电压：100V
- 纹波电流：8 mA @ 120 Hz
- 尺寸（电容体）：直径 4 mm × 长度 5.4 mm（SMD）
- 工作温度范围：-40 ℃ ~ +105 ℃
- 额定寿命：2000 小时 @ 105 ℃
- 封装形式：贴片（SMD）
- 品牌：ROQANG（容强）
注：本参数以提供信息为准，具体电气特性（如 ESR、漏电流、耐压测试值等）请参照厂方完整数据手册。
三、产品特点
- 高耐压小体积：100V 额定电压在 4×5.4mm 体积下实现，适合体积受限且需高耐压的场合。
- SMD 贴片工艺：兼容自动化贴片与回流焊流程，利于高产能 SMT 生产线装配。
- 宽工作温度：-40 ℃ 至 +105 ℃，适合大多数工业与户外环境（高温下性能随寿命衰减，请参见寿命说明）。
- 可靠性指标明确：2000 小时 @ 105 ℃ 的寿命等级，可作为设计寿命评估依据。
- 适应低频纹波：纹波电流标称 8 mA @ 120 Hz，适合交流整流后的低频滤波应用。
四、典型应用
- 高压直流滤波、整流输出平滑
- 高压供电系统中的旁路与储能
- 仪器仪表与测量电路的电压稳定电容
- 需要高压小体积的便携电源或板载滤波方案
（注意：铝电解电容为极性器件，使用时须确认极性并避免反向电压。）
五、可靠性与使用建议
- 寿命与温度呈反比关系：2000 小时为在 105 ℃、额定电压条件下的寿命指标，实际应用中在较低温度或适当降额使用可显著延长寿命。
- 降额建议：在高温或关键可靠性场合，建议按系统要求对额定电压与温度进行适当降额；具体降额策略请参考制造商推荐或工程可靠性评估。
- 焊接与工艺：本产品为 SMD 形式，适配 SMT 工艺。建议采用厂方提供的回流焊温度曲线与焊接工艺规程，避免超过推荐的温度和热冲击次数。
- 极性与防反接：装配时严格按极性标识安装，避免反向电压与瞬间反向脉冲。
六、包装与储存
- 建议在干燥、无腐蚀性气体、常温避光环境下存放，避免受潮、高温或强光直射。
- 长期储存后使用前宜进行外观检查与必要的电气性能检测，确认无泄漏或膨胀迹象。
结语：RVT2A1R0M0405 以其高耐压、小体积和贴片化优势，适用于对体积与耐压有特殊要求的滤波与储能场合。欲获取更详细的电气特性（ESR、漏电流、脉冲寿命、回流焊曲线等）及封装推荐焊盘图，请联系 ROQANG（容强）或查阅官方产品资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
