Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RT1J220M0607
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RT1J220M0607
- Type
- ROQANG
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RT1J220M0607
- Electronic Component
- 1
- Electronic Component
- 22uF
- Package
- SMD,6.3x7.7mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.552g
- Electronic Component
- 1
- Electronic Component
- BM0265022515
- Electronic Component
- 2000hrs@125℃
- Operating Temperature
- 40℃~+105℃
- Current
- 60mA@120Hz
- Voltage
- 63V
- Capacitor
- 6.3mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RT1J220M0607 产品概述
一、产品简介
RT1J220M0607 为 ROQANG（容强）生产的贴片型铝电解电容，标称容量 22 µF，容差 ±20%，额定电压 63V。器件为 SMD 封装，电容体尺寸 D6.3 × L7.7 mm，专为电路板上的滤波、退耦与能量缓冲设计，适用温度范围 -40℃ 至 +105℃，在 125℃ 下的寿命为 2000 小时。
二、主要电气参数
- 容值：22 µF（±20%）
- 额定电压：63 V
- 纹波电流：60 mA @ 120 Hz
- 工作温度：-40℃ ～ +105℃
- 工作寿命：2000 hrs @ 125℃
以上参数决定了该型号在中等电压且对体积敏感的应用场合具有良好的容量密度和可靠性表现。
三、典型应用场景
- 开关电源和线性电源的输出滤波与旁路
- DC-DC 转换器的输入/输出去耦
- 模拟电路或数字电路的稳压与瞬态能量储备
- 工业控制、电源模块及要求中高压但占板面积受限的设备
由于工作温度范围和寿命指标，该型号适合工业级应用，但在高纹波或高频场合需注意热量管理与 ESR 匹配。
四、安装与使用建议
- 极性：铝电解电容为极性器件，装配时必须正确区分正负极，PCB 上应有明显极性标识。
- 焊接：采用贴片工艺，焊接时应遵循厂家的焊接工艺规范；避免过高的焊接温度或长时间热暴露导致性能退化。
- 应用保护：在要求长期高可靠性的场合，建议对额定电压和允许纹波做适度降额（derating），并确保良好的散热路径以降低自加热。
- 板级布局：电容应靠近被滤波或去耦的器件放置，引线尽量短，保持低环路电感；必要时在焊盘处增加通孔或散热铜箔。
五、质量与测试建议
常规验收可检测：静电容量（C）、损耗角正切（tanδ）、等效串联电阻（ESR）及泄漏电流等。对批量采购或关键应用，应参考厂家的完整规格书获取详细试验条件与可靠性数据。
六、选型提示
选择本型号时，重点确认纹波电流、工作频率与系统散热条件是否匹配；若应用中存在高频大幅纹波或高峰值脉冲电流，需选用纹波能力更高或 ESR 更低的型号。有关更多精确参数（如 ESR、泄漏电流、再流曲线等），请向 ROQANG 获取完整数据表以便正确设计和可靠性评估。
如需样片或资料支持，可提供型号 RT1J220M0607 与品牌 ROQANG（容强）作为采购与查阅依据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
