Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVT1V100M0505
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVT1V100M0505
- Type
- ROQANG
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVT1V100M0505
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- SMD,5x5.4mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.354g
- Electronic Component
- 1
- Electronic Component
- BM0264793501
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 22mA@120Hz
- Voltage
- 35V
- Capacitor
- 5mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVT1V100M0505 产品概述
一 主要参数与型号说明
RVT1V100M0505 为 ROQANG（容强）出品的贴片铝电解电容，标称容量 10µF，容差 ±20%，额定电压 35V。体形为 SMD 封装，电容体直径 5.0mm，长度 5.4mm（D5 × L5.4mm），适合空间受限的表面贴装应用。纹波电流标称 22mA（@120Hz），工作温度范围 -40℃ 到 +105℃，在 105℃ 下寿命为 2000 小时。
二 关键性能特点
- 小型化封装：5 × 5.4mm 的体积便于高密度 PCB 布局，适合便携式与模块化电路板。
- 中等电压能力：35V 的额定电压可覆盖多种单电源与中低压电源轨应用。
- 通用容量与容差：10µF/±20% 适用于旁路、耦合与滤波等常见用途。
- 低频纹波处理：22mA@120Hz 的纹波电流特性表明该器件适合较低幅值的纹波消除与稳压输出平滑。
三 典型应用场景
- 电源滤波与整流后滤波（低至中等电流负载）
- 模拟电路旁路与耦合（如音频前端、低频放大器）
- 便携设备与工业控制板上用于去耦与储能的小容量位置 注意：不建议用于高纹波、高频开关电源主滤波场合（除非分流或并联低 ESR 器件）。
四 可靠性与寿命说明
标称寿命 2000hrs@105℃，说明该器件在高温应力下仍能维持性能，但长期可靠性与寿命随温度显著相关：在较低工作温度下实际寿命会成倍延长。铝电解电容为有极性元件，避免反向电压与超温运行以防电解质退化。
五 选型与使用建议
- 若电路存在较大纹波或频繁温升，优先选择更高纹波能力或并联低 ESR 电容以分担电流。
- 对长期可靠性有较高要求的设计，建议适当电压与温度降额（例如选型留有 20%~40% 的电压余量），并避免长期接近 105℃ 环境。
- 确认电路为直流偏置下使用并保证正确极性连接。
六 储存与焊接注意事项
- 建议按厂家推荐的湿敏等级和储存条件保存，避免潮湿导致封装吸湿。
- 焊接时遵循回流焊温度曲线的规范，避免过热；如需手工焊接，注意热传导时间控制以免损伤密封与电解质。
- 贴装时注意极性标识，确保正负极方向正确，避免因反接引发失效。
总结：RVT1V100M0505 是一款小型化、适用于低至中等纹波场合的 10µF/35V SMD 铝电解电容，适合空间受限的电源滤波与一般去耦应用；设计时需关注纹波、电压降额与长期工作温度以保证可靠性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
