Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVT1H330M0607
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVT1H330M0607
- Type
- ROQANG
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVT1H330M0607
- Electronic Component
- 1
- Electronic Component
- 33uF
- Package
- SMD,6.3x7.7mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.582g
- Electronic Component
- 1
- Electronic Component
- BM0264780438
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 63mA@120Hz
- Voltage
- 50V
- Capacitor
- 6.3mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVT1H330M0607 产品概述
一、产品简介
RVT1H330M0607（ROQANG 容强）为贴片型铝电解电容，标称容量 33µF，容差 ±20%，额定电压 50V，设计用于表面贴装电路板的小尺寸滤波与去耦场合。电容体尺寸为 Φ6.3mm × L7.7mm，封装 SMD，工作温度范围 -40℃ 至 +105℃，在 105℃ 下额定寿命为 2000 小时。120Hz 纹波电流能力为 63mA。
二、主要规格（关键参数）
- 容值：33µF ±20%
- 额定电压：50V
- 纹波电流：63mA @ 120Hz
- 电容体尺寸：直径 6.3mm，长度 7.7mm（SMD）
- 工作温度：-40℃ ~ +105℃
- 寿命：2000 hrs @ 105℃
- 品牌：ROQANG（容强）
三、产品特性与应用场景
该系列体积小、耐压高，适用于需在有限空间内实现 50V 直流滤波或能量缓冲的场合，例如工业控制电源、DC-DC 转换器后端滤波、模拟/音频电路电源去耦及一般电子设备的旁路保护。因纹波电流较低，更适合低功率、低纹波的稳压输出及信号链电源滤波。
四、选型与应用建议
- 纹波与寿命：实际应用中应按额定纹波的 80% 以下工作并考虑温升；若电路纹波较大，应选用纹波电流更高的型号或并联多个电容以分摊热量。
- 电压裕量：建议在设计中对额定电压做 20% 以上的余量（即工作电压 ≤ 40V）以提高可靠性与寿命。
- 温度影响：在低于 105℃ 的实际工作温度下，寿命会显著延长；请根据使用环境估算等效寿命。
- 极性与浪涌：为铝电解，注意极性连接，避免反向电压与频繁浪涌。
五、焊接与储存注意事项
- 焊接：遵循厂商推荐的回流曲线，避免超过最高回流峰值温度及时长以防电解质性能退化。
- 储存：在干燥、常温环境中存放，避免潮湿与高温暴晒；长期储存前建议封装未开封状态下进行湿度控制。
- 贴装：确保焊盘设计与贴片尺寸匹配，预留充分散热路径以降低温升。
六、可靠性要点与替代方案
该型号适合中短期工业级应用；若需更长寿命或更高纹波能力，应选用高寿命（例如 5000–10000hrs@105℃）或固态铝电解/钽电容、低 ESR 类型。并联电容可降低等效 ESR 与分担纹波电流，但需注意容值匹配与实际板上布局。
总结：RVT1H330M0607 在体积受限且需 50V 耐压时提供了合理的容量与封装选择，适合低至中等纹波场合。正确的电压余量、热管理与焊接工艺是保证长期可靠性的关键。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
