Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVT1C330M0505
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVT1C330M0505
- Type
- ROQANG
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVT1C330M0505
- Electronic Component
- 1
- Electronic Component
- 33uF
- Package
- SMD,5x5.4mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.354g
- Electronic Component
- 1
- Electronic Component
- BM0264860471
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 29mA@120Hz
- Voltage
- 16V
- Capacitor
- 5mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVT1C330M0505 产品概述
一、产品简介
RVT1C330M0505 是 ROQANG（容强）出品的一款贴片型铝电解电容，容值为 33µF，额定电压 16V，容差 ±20%。封装为 SMD，电容体直径 5mm，长度 5.4mm（D5×L5.4mm），适配空间受限的表面贴装应用。工作温度范围 -40℃～+105℃，在 105℃ 下额定寿命为 2000 小时。
二、主要参数
- 容值：33µF
- 精度：±20%
- 额定电压：16V
- 纹波电流：29mA @ 120Hz
- 外形尺寸：5 × 5.4 mm（直径×长度）
- 工作温度：-40℃～+105℃
- 可靠性：2000hrs @ 105℃
- 封装：SMD（贴片）
三、性能与优势
- 小型化、低剖面设计，便于高密度 PCB 布局与移动设备使用。
- 适合低至中等纹波场合，29mA@120Hz 表明在典型信号滤波与去耦场景能够胜任。
- 宽温特性与较高最高工作温度，适应工业级与商业级环境。
- 标准化 SMD 封装，兼容常规表面贴装工艺，便于自动化生产。
四、典型应用场景
- 电源滤波与稳压输出端的去耦与储能。
- 嵌入式模块、通信设备与物联网终端中对体积和高度有限制的电源回路。
- 消费电子、小型电源模组、传感器前端的旁路/滤波。
五、使用建议与注意事项
- 额定寿命为 2000 小时（105℃），实际可靠性受工作温度、纹波电流与工作电压影响，建议按实际工况留有安全裕度；长期高温或接近额定电压运行会显著缩短寿命。
- 在布局时预留足够散热路径，避免长期处于高温区域。
- 存储与焊接请参考厂方推荐的环境与回流曲线，防潮包装后在规定时限内使用以保证性能。
- 因容差 ±20%，在需精确容值的电路应预留容差范围或并联/选型调整。
六、总结
RVT1C330M0505 以紧凑体积与标准 SMD 形式为主打，适合追求体积与成本平衡的低功率滤波与去耦应用。选型时应结合工作温度、纹波与寿命需求评估是否满足长期可靠性要求，如需更高寿命或更大纹波能力，可考虑更高规格的型号或并联使用。若需详细电气参数与回流/储存规范，建议参考 ROQANG 的完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
