Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG KM1V101M0611
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG KM1V101M0611
- Type
- ROQANG
- Minimum package
- 1000 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- KM1V101M0611
- Electronic Component
- 1
- Electronic Component
- 100uF
- Package
- Through-hole, D6x L11mm
- Electronic Component
- Through-hole Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.56g
- Electronic Component
- 1
- Electronic Component
- BM0264860753
- Operating Temperature
- 40℃~+105℃
- Voltage
- 35V
- Capacitor
- 6mm
- Capacitor
- 11mm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
KM1V101M0611 产品概述
一、产品简介
KM1V101M0611 为 ROQANG（容强）品牌的直插铝电解电容，额定电容量 100µF，额定电压 35V，公差 ±20%。该器件采用插件（直插）封装，电容体直径 6mm，长度 11mm（D6×L11mm），适用于空间受限但要求稳健滤波与去耦的电源电路。工作温度范围宽泛，为 -40℃ 至 +105℃，满足多数工业与消费电子环境的温度要求。
二、主要性能参数
- 电容值：100µF
- 精度：±20%
- 额定电压：35V
- 工作温度：-40℃ ~ +105℃
- 封装形态：插件（直插）D6×L11mm
- 品牌：ROQANG（容强）
（注：关于漏电流、等效串联电阻（ESR）、额定纹波电流和寿命等详细电气特性，请以厂家技术资料或样品实测为准。）
三、结构与封装特点
KM1V101M0611 采用经典铝电解结构，带有有机电解质以提供较高的电容量与体积比。6mm×11mm 的小尺寸使其在直插工艺中占用空间小，适合密集布置。引脚适配常见插件孔径与焊盘布局，便于波峰焊或手工焊接后进行可靠连接。
四、典型应用场景
- 开关电源输入/输出滤波与能量储存
- 模拟电路和音频电路的电源去耦
- 单片机与数字电路的电源旁路
- 工业设备和仪器的稳压/缓冲电路
- 各类消费电子、通讯设备中的直插替换或维修件
五、选型与使用建议
- 电压裕量：建议工作电压不超过额定电压，典型选型留有 20%~50% 马路裕量以延长寿命。
- 温升与纹波：在高纹波或高温环境中，电容寿命会明显下降。请参考制造商的纹波电流与寿命曲线进行热设计与散热处理。
- 极性注意：铝电解电容为极性元件，安装时请确认正负极，避免反接导致失效或爆破。
- 焊接工艺：焊接时遵循厂家推荐的温度与时长规范，避免因过热引起内部电解质退化。必要时先做小批量工艺验证。
六、储存与可靠性注意事项
- 储存环境应避光、防潮、防腐蚀气体，建议相对湿度不超过 60% 并避免高温直射。
- 长期储存后使用前建议按数据手册进行外观、容量和漏电流的检测。
- 在实际使用中，寿命受温度、工作电压和纹波电流共同影响，关键应用建议进行加速老化和寿命验证。
七、包装与订购提示
KM1V101M0611 为插件型铝电解电容，通常以卷带或盘装形式供应以便插件加工。订购时请注明型号、数量及是否需要针对特定焊接工艺的额外测试或筛选服务。
如需更详细的电气参数（如 ESR、漏电流、额定纹波电流与寿命曲线）或样品与报价，请联系 ROQANG 官方或向供应商索取该型号的完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
