Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVE1V101M0607
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVE1V101M0607
- Type
- ROQANG
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVE1V101M0607
- Electronic Component
- 1
- Electronic Component
- 100uF
- Package
- SMD,D6.3xL7.7mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.582g
- Electronic Component
- 1
- Electronic Component
- BM0230042585
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 55℃~+105℃
- Current
- 230mA@120Hz
- Voltage
- 35V
- Capacitor
- 6.3mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVE1V101M0607 产品概述
RVE1V101M0607 是 ROQANG（容强）推出的一款贴片型铝电解电容器，额定电容 100µF，允许偏差 ±20%，额定电压 35V。器件采用 SMD 封装，电容体直径 6.3mm，长度 7.7mm（标注为 D6.3×L7.7mm），适用于需要中等容值与中等纹波能力的紧凑型电源滤波与去耦场合。
一 主要规格与参数
- 容值：100µF ±20%
- 额定电压：35V
- 纹波电流：230mA @ 120Hz
- 等效串联电阻（ESR）：600mΩ
- 封装：SMD，D6.3 × L7.7mm
- 工作温度范围：-55℃ ~ +105℃
- 工作寿命：2000 小时 @ 105℃
- 品牌：ROQANG（容强）
- 型号：RVE1V101M0607
二 关键特性与优势
- 紧凑体积：小直径与短长度适配高密度贴片组装，节省 PCB 面积。
- 可靠性：2000 小时 @105℃ 的寿命等级，适用于一般工业与消费电子的中短期耐热应用。
- 良好滤波性能：100µF 的容量配合 600mΩ 的 ESR，可在电源滤波与去耦中提供稳定的纹波吸收能力。
- 标准化封装：适配常规 SMD 生产线，便于自动贴装与回流焊工艺集成。
三 电气与热特性使用要点
- 纹波相关：器件的纹波损耗可近似计算为 Pd ≈ (I_ripple)^2 × ESR。长期超出额定纹波电流会导致温升、蒸发加速与寿命缩短。
- 温度与寿命：高温运行会显著影响电解液的寿命，建议在靠近额定温度或高纹波工况下采取降额策略或选用更高温等级/更大容值的器件。
- 尺寸与布局：由于为铝电解电容，建议在 PCB 上留有适当通风与散热路径，避免热源直接接触电容体。
四 典型应用场景
- 开关电源输出滤波与储能
- 模拟电路与放大器的电源去耦
- 工业控制板与通信设备中的滤波模块
- 需要小型化 SMD 安装且对中等纹波能力有需求的电子产品
五 选型与装配建议
- 降额使用：在长期高温或高纹波场合，优先考虑更高额定电压或增加容量余量，以延长使用寿命。
- 焊接工艺：遵循制造商推荐的回流焊工艺与温度曲线，避免过长高温暴露。
- 机械固定：对较高冲击或振动环境，建议在电容周边增加胶粘或机械支撑以防脱落。
- 库存与存放：避光、干燥、常温环境存放，避免高湿高温导致性能退化。
六 选型注意事项
- 若电路纹波频率高于 120Hz，需依据实际频率与温升重新评估有效纹波能力；额定值 230mA@120Hz 为参考项。
- ±20% 的容量公差对滤波与时间常数影响较大，关键参数覆盖需考虑容差带来的最差情况。
- ESR 较高（600mΩ）意味着在要求低阻抗滤波或快速瞬态响应的场合可能不如低 ESR 电容适用，应根据电路性能需求权衡选择。
如需获取元件的详细数据表、回流焊曲线、推荐 PCB 焊盘尺寸或可靠性试验报告，可联系 ROQANG 或授权代理获取完整技术文件，以便在具体设计中精确验证与应用。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
