Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TI SN74LVC1G08DRYR
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TI(Texas Instruments) SN74LVC1G08DRYR
- Type
- TI
- Minimum package
- 5000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- TI(Texas Instruments)
- Electronic Component
- SN74LVC1G08DRYR
- Electronic Component
- 1
- Package
- SON-6(1x1.5)
- Electronic Component
- Logic Gate
- Electronic Component
- 74LVC
- Electronic Component
- 0.001g
- Electronic Component
- 1
- Channel Count
- 1
- Features
- Driver
- Electronic Component
- BM0230811549
- Operating Temperature
- 40℃~+125℃
- Operating Voltage
- 1.65V~5.5V
- Logic Type
- and Gate
- Current(IOH)
- 24mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SN74LVC1G08DRYR 产品概述
一、器件简介
SN74LVC1G08DRYR 是德州仪器（TI）74LVC 系列的单通道双输入与门（AND），采用小型 SON-6 (约 1.45 × 1.0 mm) 封装。器件面向低电压、低功耗、高速逻辑应用，适合空间受限的便携式或密集板上设计。
二、主要规格
- 逻辑类型：与门（2 输入）。
- 通道数：1。
- 工作电压：1.65 V ～ 5.5 V（宽电源范围，便于与多种电平系统配合）。
- 静态电流（Iq）：典型 10 µA 级别，适合低功耗应用。
- 输出驱动：IOL / IOH 均可达 24 mA（强驱动能力，能直接驱动中等负载）。
- 输入门限：VIH：2.0 V / 1.7 V（随 VCC/条件而异）；VIL：800 mV / 700 mV。
- 输出电平：VOH：2.3 V / 3.8 V；VOL：550 mV / 450 mV（具体值与 VCC 与负载有关）。
- 传播延迟（tpd）：约 3.6 ns（在 VCC = 3.3 V，CL = 15 pF 时测得）。
- 工作温度：-40 ℃ ～ +125 ℃。
三、功能与应用场景
该器件提供标准 TTL/CMOS 兼容的与逻辑，适用于：
- 逻辑译码与组合逻辑阶段；
- 多信号使能或仲裁电路；
- 低压微控制器、FPGA/ASIC 前端接口；
- 便携设备、通信设备及工业控制系统中对空间与功耗有严格要求的场合。
四、封装与 PCB 注意事项
- 封装：SON-6（1.45×1.0 mm），适合高密度布板与自动化贴装。
- 电源去耦：建议靠近器件 VCC 与 GND 引脚放置 0.1 µF 陶瓷去耦电容，以抑制瞬态干扰并稳定输出性能。
- 接地与散热：尽管功耗低，建议保证良好地平面连接以利散热与信号完整性。
- 未使用输入：未连接的输入应避免浮空，建议拉高或拉低至确定电平（通过上拉/下拉电阻或直接连接），以防止功耗增加或不确定输出。
五、设计提示与可靠性
- 电平兼容性：器件支持 1.65 V 至 5.5 V，因此可在不同电压域之间灵活使用，但输入/输出电平应匹配系统要求以确保门限满足。
- 负载能力：24 mA 的输出驱动能力允许直接驱动多数中等负载，但若驱动多个输入或更大负载，应考虑输出限流或缓冲级。
- 时序预算：典型传播延迟为纳秒级，适合高速逻辑路径；在精密时序设计中请按典型/最大延迟值和负载电容校核时序裕量。
- 工作温度与可靠性：工业级温度范围（-40 ℃ ～ +125 ℃）适用于恶劣环境；设计时仍需关注热管理与长时稳定性。
如需更详细的电气特性表、引脚定义或参考电路图，请参考 TI 官方器件数据手册或联系供应渠道获取完整技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
