Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOGIALED TJ-S1608SW6TNPGLCRB-A5
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOGIALED TJ-S1608SW6TNPGLCRB-A5
- Type
- TOGIALED
- Minimum package
- 4000 编带
Technical parameters
- Power
- 108mW；72mW
- Electronic Component
- Electronic Component
- Electronic Component
- TOGIALED
- Electronic Component
- TJ-S1608SW6TNPGLCRB-A5
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- 620nm~630nm；460nm~470nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.019g
- Electronic Component
- 1
- LED
- 160mcd；160mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0229921591
- Electronic Component
- 630nm；460nm
- Operating Temperature
- 40℃~+80℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TJ-S1608SW6TNPGLCRB-A5 产品概述
一、产品简介
TJ-S1608SW6TNPGLCRB-A5 为统佳（TOGIALED）推出的小封装双色发光二极管（0603），集成红色与蓝色发光芯片，采用无色透明透镜，视角宽阔（120°），适合背光、指示灯、微型显示和紧凑型光源应用。封装尺寸符合0603 标准，利于高密度贴片与自动化生产。
二、主要电学与光学参数
- 发光颜色：红色 / 蓝色
- 波长范围：红色 620–630 nm（峰值 630 nm）；蓝色 460–470 nm（峰值 460 nm）
- 正向电压 (Vf)：红色 1.8–2.4 V；蓝色 2.8–3.4 V
- 额定正向电流：20 mA（典型驱动条件）
- 标称功率：红色 108 mW；蓝色 72 mW
- 发光强度：160 mcd（典型值）
- 发光角度：120°（半功率角）
- 透镜颜色：无色透明
三、环境与可靠性
工作温度范围为 -40 ℃ 至 +80 ℃，适应工业级温度需求。封装与材料选型兼顾长期稳定性与抗黄化性能，建议在推荐的温湿度范围内存储与使用，避免长时间高温高湿环境以延长寿命。
四、封装与装配建议
- 封装：0603 小型 SMD，便于高密度贴片及自动化回流焊流程。
- 焊接：推荐采用标准回流焊曲线，避免超温滞留；回流峰值温度及时间请参考统佳提供的焊接工艺文件。
- 防静电：LED 对静电敏感，装配与测试过程中请做好 ESD 防护（佩戴接地腕带、使用防静电台面等）。
五、典型应用场景
适用于工业与消费电子的指示灯、状态显示、按键背光、微型信号灯、光学指示模块及需要双色指示的紧凑型电路设计。
六、使用注意事项
- 驱动：建议使用恒流驱动或限流电阻，避免过流导致寿命下降。
- 热管理：尽管为低功耗元件，长时间工作时仍需考虑PCB散热设计与合理的间距布局。
- 测试与鉴别：出厂参数为典型/范围值，实际选型时建议参考样品实测数据并与统佳技术资料对照。
若需更详细的电气特性曲线、回流焊工艺建议或封装尺寸图纸，请提供联系信息或向统佳代理获取完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
