Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOGIALED TJ-S3528UG6W9TLC9Y-A5
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOGIALED TJ-S3528UG6W9TLC9Y-A5
- Type
- TOGIALED
- Minimum package
- 2000 圆盘
Technical parameters
- Power
- 72mW
- Electronic Component
- Electronic Component
- Electronic Component
- TOGIALED
- Electronic Component
- TJ-S3528UG6W9TLC9Y-A5
- Electronic Component
- 1
- Package
- SMD3528-2P
- Electronic Component
- 585nm~595nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.059g
- Electronic Component
- 1
- LED
- 900mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0264488336
- Electronic Component
- 590nm
- Operating Temperature
- 40℃~+80℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TJ-S3528UG6W9TLC9Y-A5 产品概述
一、产品简介
TJ-S3528UG6W9TLC9Y-A5 是统佳（TOGIALED）推出的高亮黄光SMD LED，采用常见的3528封装（SMD3528-2P），单独二极管配置。发光颜色为暖黄至纯黄（峰值波长590nm，波长范围585–595nm），适用于指示、背光及装饰照明等场景。
二、主要参数
- 发光颜色：黄色
- 峰值波长：590nm（585–595nm）
- 正向电流：20mA（典型驱动电流）
- 正向压降（Vf）：1.8V ~ 2.4V
- 最大功率耗散：72mW
- 发光强度：900mcd（标准测试条件）
- 发光角度：120°
- 封装：SMD3528-2P（表面贴装）
- 工作温度：-40℃ ~ +80℃
- 载带方式：正贴（适配自动贴片机）
三、性能特点
- 高显色的黄光输出，峰值590nm，色彩稳定性好，适合对色彩有要求的应用。
- 大视角（120°）提供均匀照明和宽广的观察范围，适合面光源和指示用途。
- 单二极管独立配置，便于电路设计与逐点控制。
- 工作温度范围宽，适合室内外及车载等复杂环境使用。
- 封装可靠，兼容常规SMD贴装与回流焊工艺。
四、应用场景
- 仪器仪表和面板指示灯
- 家电及消费电子背光/指示
- LED灯带与装饰照明
- 室内/商业标识与点光源布局
- 汽车内饰及控制面板（需按车规评估）
五、使用建议与注意事项
- 推荐驱动电流为20mA，若需更长寿命或更低发热可适当降流。
- 功率核算示例：在最大Vf=2.4V且If=20mA时，电功率约为48mW，低于最大功率72mW，留有余量。
- 串联限流电阻计算示例（5V供电，取Vf≈2.1V）：R≈(5–2.1)/0.02≈145Ω，可选150Ω标准值。
- 遵循标准回流焊曲线，避免超出包装推荐的峰值温度和时长；储存与回流前注意防潮处理。
- 为保证长寿命与亮度一致性，建议合理的PCB散热与驱动设计，并做必要的ESD防护。
六、可靠性与品质
统佳（TOGIALED）器件出厂前经过光电参数筛选与可靠性试验，适配自动化贴装流程，提供稳定的光学与电气表现。对于特殊应用（如汽车级或高温环境），建议与供应商确认更详细的应力测试与批次一致性数据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
