Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOGIALED TJ-L3FYWGHRMFCSFLC2R-A5
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOGIALED TJ-L3FYWGHRMFCSFLC2R-A5
- Type
- TOGIALED
- Minimum package
- 1000 圆盘
Technical parameters
- Power
- 72mW
- Electronic Component
- Electronic Component
- Electronic Component
- TOGIALED
- Electronic Component
- TJ-L3FYWGHRMFCSFLC2R-A5
- Electronic Component
- 1
- Package
- Through-hole, D=3mm
- Electronic Component
- 620nm~630nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.21g
- Electronic Component
- 1
- LED
- 500mcd
- LED
- 45°
- LED
- Electronic Component
- Electronic Component
- BM0264488310
- Electronic Component
- 630nm
- Operating Temperature
- 20℃~+80℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TJ-L3FYWGHRMFCSFLC2R-A5 产品概述
一、产品简介
TJ-L3FYWGHRMFCSFLC2R-A5 为 TOGIALED（统佳）出品的 3mm 圆形无边雾状红色指示灯，采用独立二极管结构与雾状红色透镜，提供均匀柔和的红色光源。外形小巧，透镜雾面处理有效降低眩光，适合各类面板指示与点光源照明场景。
二、主要参数
- 灯头类型：3mm 圆形（无边）
- 透镜颜色：雾状红色
- 发光颜色：红色（波长 620nm～630nm，峰值 630nm）
- 正向电压 Vf：1.7V ～ 2.5V
- 正向电流 If：20mA（典型驱动电流）
- 功率：72mW（额定）
- 发光强度：500mcd（If=20mA）
- 发光角度：45°
- 二极管配置：独立二极管
- 工作温度：-20℃ ～ +80℃
- 封装形式：插件（D=3mm）
三、产品特点
- 光学均匀：雾状透镜扩散效果良好，出光柔和、无明显光斑，适用于需要舒适视觉效果的指示场合。
- 亮度适中：500mcd 的典型发光强度在面板指示与小型显示器件中表现良好，既能被远距识别又不刺眼。
- 小巧通用：3mm 小直径设计，适配常见面板开孔和插件加工工艺，便于批量装配。
- 宽温工作：-20℃～+80℃ 的工作温度范围，满足多数工业与民用环境需求。
四、推荐使用与驱动
- 建议驱动电流为 20mA，尽量不要长期超载以延长使用寿命并保证稳定性。
- 串联限流电阻计算示例（以 5V 电源为例）：R = (Vs - Vf) / If。取 Vf 约 2.0V，If = 20mA，则 R ≈ (5.0 - 2.0) / 0.02 = 150Ω。
- 在实际应用中应根据电源精度与整机热设计适当留余量，并避免反复大电流冲击。
- 插件焊接时注意控制加热时间与温度，避免长时间过热影响封装与光学性能。
五、典型应用场景
- 仪表面板与指示灯（家电、工业设备、仪器仪表）
- 按键背光与状态指示（消费电子、遥控器、玩具）
- 信号提示与小型显示模块
- 其他需要小型、柔和红色指示光的场合
六、封装与可靠性建议
- 本款为插件（Through-hole）封装，适合波峰焊或手工焊接装配。
- 存储与使用时应避免潮湿、高温及强烈机械冲击；长期储存建议保持干燥、防尘包装。
- 对于长期稳定性要求较高的项目，建议在样件上进行实际寿命与热循环验证。
七、订购信息与注意事项
- 产品型号：TJ-L3FYWGHRMFCSFLC2R-A5
- 品牌：TOGIALED（统佳）
- 下单时请确认所需电流等级、透镜颜色及包装形式，如需样品或批量采购可联系供应商确认交期与质保条款。
- 使用时请严格遵守推荐电流与额定功率，避免超额驱动造成性能衰减或损坏。
如需获取更详细的电气特性曲线、光强分布图或封装尺寸图，请提供具体需求，我可以为您整理技术资料或对接供应商信息。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
