Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
UNI-ROYAL 0603WAF6802T5E
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- UNI-ROYAL 0603WAF6802T5E
- Type
- UNI-ROYAL
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- UNI-ROYAL
- Electronic Component
- 0603WAF6802T5E
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.023g
- Electronic Component
- 68kΩ
- Electronic Component
- 1
- Electronic Component
- BM0257341490
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
0603WAF6802T5E 产品概述
一、产品简介
0603WAF6802T5E 为 UNI-ROYAL（厚声）出品的贴片厚膜电阻，封装为0603（约1.6 mm × 0.8 mm），标称阻值 68 kΩ，公差 ±1%。该器件属于通用级厚膜 chip 电阻，适合表面贴装回流焊工艺，常用于体积受限且要求中高阻值稳态的电路设计中。
二、主要技术参数
- 阻值：68 kΩ
- 精度：±1%
- 额定功率：100 mW（室温条件下）
- 最大工作电压：75 V
- 温度系数（TCR）：±100 ppm/℃
- 工作温度范围：-55 ℃ 至 +155 ℃
- 封装：0603（贴片）
- 品牌：UNI-ROYAL（厚声）
三、性能与适用场景
该型号电阻以高阻值与较低温漂为特点（±100 ppm/℃），适用于分压器、电压检测/偏置网络、信号隔离与滤波网络以及大多数消费电子、工业控制与测试仪器中的非超高精度应用场合。68 kΩ 阻值在高阻输入、漏电流受控的设计中较为常见，且 1% 精度可满足多数模拟与数字混合系统的配套需求。
四、封装与可靠性
0603 小尺寸封装便于高密度 PCB 布局，适用于自动化贴装与回流焊流程。工作温度上限 +155 ℃ 表明器件在较高环境温度下仍可长期工作，但实际功率耗散会随环境温度升高而下降，建议遵循厂方的温度—功率降额曲线以保证可靠性。常见包装方式为卷带（Tape & Reel），便于 SMT 生产线使用。
五、使用建议与注意事项
- 额定功率 100 mW 为室温额定值，实际设计中应留有裕量并在高温环境下进行功率降额考虑。
- 最大工作电压 75 V，应避免长时间在接近极限电压下工作以防热击穿或材料老化。
- ±1% 精度及 ±100 ppm/℃ 的温漂适合中等精度电路，但对温度敏感或需极高稳定性的应用（如精密参考电阻）应选用更高等级产品。
- 推荐遵循厂商的推荐焊接和存储规范，避免超温回流或长期湿热环境以延长使用寿命。
总结：0603WAF6802T5E 是一款小型化、通用性强的厚膜贴片电阻，适用于对空间、成本敏感且需中等精度与稳定性的电子产品设计。若需更严格的温漂、功率或可靠性指标，请参考 UNI-ROYAL 提供的完整产品技术资料或咨询厂方技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
