Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
UNI-ROYAL 0402WGF3600TCE
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- UNI-ROYAL 0402WGF3600TCE
- Type
- UNI-ROYAL
- Minimum package
- 10000 圆盘
Technical parameters
- Power
- 62.5mW
- Electronic Component
- Electronic Component
- Electronic Component
- UNI-ROYAL
- Electronic Component
- 0402WGF3600TCE
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.009g
- Electronic Component
- 360Ω
- Electronic Component
- 10
- Electronic Component
- BM0257244992
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 50V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
0402WGF3600TCE 产品概述
一、产品简介
0402WGF3600TCE 是 UNI-ROYAL（厚声）出品的一款贴片厚膜电阻，封装尺寸为 0402（约 1.0 × 0.5 × 0.45 mm）。标称阻值 360Ω，精度 ±1%，额定功率 62.5 mW，最大工作电压 50 V，温度系数（TCR）±100 ppm/℃，工作温度范围 -55℃ ~ +155℃。适用于对体积、成本有严格要求且需要稳定阻值的通用电子电路。
二、主要技术参数
- 电阻类型：厚膜电阻（贴片）
- 阻值：360 Ω（标称）
- 精度：±1%（E96 精度等级）
- 额定功率：62.5 mW（在推荐印制板热条件下）
- 最大工作电压：50 V
- 温度系数：±100 ppm/℃
- 工作温度：-55℃ ~ +155℃
- 封装：0402（约 1.0 × 0.5 mm）
- 品牌：UNI-ROYAL（厚声）
三、产品特性与适用场景
0402WGF3600TCE 以小尺寸、高精度为特色，适合：移动设备、便携终端、消费电子、传感前端的阻值分压、上拉/下拉、滤波及信号整形等场景。厚膜工艺成本较低、批量一致性良好，但与薄膜、金属膜相比噪声略高、长期漂移更明显，适合一般信号和电源应用而非超高精度测量场合。
四、PCB 布局与焊接建议
- 推荐按照 IPC/JEDEC 标准设计 0402 封装焊盘，留足焊盘长度以利焊锡润湿与热散发。
- 焊膏模板开孔常用 60%~80% 的焊盘覆盖率以防过量焊膏造成偏位。
- 热管理：小尺寸功率受限，建议尽量减少邻近热源并采用较宽铜箔连接以利散热。
- 焊接工艺：兼容无铅回流工艺（遵循 J-STD-020 峰值温度 ≤260℃），避免重复过热和机械应力。
五、可靠性与测试
厚膜电阻经过常规可靠性测试（高低温循环、湿热、焊接热稳定性及机械振动/冲击测试）以验证批次稳定性。产品实际使用时应避免长期在额定功率附近工作，遵循厂家给出的功率降额曲线以延长使用寿命。
六、使用注意事项与存储
- 电压限制：单片工作电压不得超过 50 V，以防电介质击穿或绝缘损坏。
- 功率与热：在高环境温度或热密集布局中应适当降额使用。
- 机械保护：贴装前避免弯折、挤压，贴装后避免强烈机械冲击。
- 存储：常温干燥、避免潮湿与强腐蚀性气体，未开封推荐按供应商说明存放以保证焊接性。
七、订购与替代
产品型号：0402WGF3600TCE；品牌 UNI-ROYAL（厚声）。如需更高稳定性或更低噪声，可考虑薄膜或金属膜 SMD 电阻替代；若需更高功率请选更大封装（0603、0805 等）。购买时请确认供货批号与资质文件以确保一致性与可靠性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
