Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLPTEC E2415S-2WR3 E2415S
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YLPTEC E2415S-2WR3
- Type
- YLPTEC
- Minimum package
- 25 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YLPTEC
- Electronic Component
- E2415S-2WR3
- Electronic Component
- 1
- Electronic Component
- 7mm
- Package
- SIP,19.5x7mm
- Type
- Electronic Component
- Electronic Component
- Isolated Power Supply Module
- Electronic Component
- 2.51g
- Electronic Component
- 19.5mm
- Electronic Component
- 10mm
- Electronic Component
- 1
- Electronic Component
- BM0265023109
- Operating Temperature
- 40℃~+85℃
- Switching Frequency
- 100kHz
- Type
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
E2415S-2WR3 产品概述
一、产品简介
E2415S-2WR3 是 YLPTEC（易川）推出的一款塑封型双路隔离DC-DC转换器，输入电压范围21.6V~26.4V，输出为对称 ±15V 双路，总输出功率2W。模块体积小（SIP 19.5×7×10 mm），适合空间受限的工业与通信设备，为需要隔离与双电源轨的系统提供稳定的能量来源。
二、主要电气性能
- 输出通道数：2（对称 ±15V）
- 输出功率：2W（总功率）
- 输入电压：21.6V ~ 26.4V
- 输出电流（最大）：67mA（单路）
- 转换效率：典型84%
- 纹波噪声：30mVp-p
- 最大容性负载：100µF
- 隔离电压：3kV Vrms
- 开关频率：100kHz
- 稳压类型：非稳压型（输出随输入与负载轻微变化）
三、保护与可靠性
模块具有短路保护、自动故障恢复与过热保护功能，能在异常工况下自动限制输出并在保护解除后恢复工作，显著提升系统可靠性。工作温度范围宽（-40℃~+85℃），适用于各种室温与严苛工业环境。
四、封装与安装
塑封SIP封装（19.5×7×10 mm），长度窄、厚度低，便于在高密度电路板或导轨式安装中节省空间。模块采用塑封工艺，抗振动能力优于裸板方案，易于批量生产与手工焊接或波峰焊。
五、典型应用场景
适用于工业控制、仪器仪表、数据采集、通信设备、传感器隔离、隔离放大器及ADC/DAC供电等场合。特别适合需要双极电源（±15V）且要求输入/输出间高隔离的模拟前端与信号链路。
六、使用建议
由于为非稳压型输出，建议在负载变化较大或精密模拟电路中配合局部线性稳压器或LC滤波以降低纹波并保证稳压性能。为获得最佳性能，应在模块输入端加足够的去耦电容，输出端根据需要配置旁路电容（但不超过最大容性负载100µF）。在高温或密闭环境下建议加入散热或强制风冷以降低热关断频率。
七、小结
E2415S-2WR3 以其高隔离电压、良好的转换效率与丰富的保护功能，为空间受限且对隔离与双轨电源有需求的系统提供了可靠且经济的解决方案。其小巧封装和工业级工作温度范围使得该模块在各类嵌入式与工业应用中具有很高的工程实用价值。若需详细引脚定义或典型电路图，请提供具体用途或向厂家索取应用手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
