Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLPTEC URB2424LD-60WR3 URB2424LD
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YLPTEC URB2424LD-60WR3
- Type
- YLPTEC
- Minimum package
- 20 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YLPTEC
- Electronic Component
- URB2424LD-60WR3
- Electronic Component
- 1
- Electronic Component
- 25.4mm
- Package
- DIP-6
- Electronic Component
- Isolated Power Supply Module
- Electronic Component
- 41.5g
- Electronic Component
- 50.8mm
- Electronic Component
- 11.8mm
- Electronic Component
- 1
- Electronic Component
- BM0258715918
- Operating Temperature
- 40℃~+105℃
- Switching Frequency
- 310kHz
- Electronic Component
- 100mVp-p
- Conversion
- 93%
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
URB2424LD-60WR3 产品概述
一、产品简介
URB2424LD-60WR3 是 YLPTEC(易川) 出品的一款高性能隔离型 DC-DC 转换器（DIP-6 封装），单通道输出，额定输出功率 60W。模块输入电压范围宽（9V~36V），输出为 24V/2.5A，转换效率高达 93%，适合对体积、效率与可靠性有较高要求的工业与通信类应用。描述校验通过，性能参数稳定可靠。
二、电气主要参数
- 输入电压 Vin：9V ~ 36V
- 输出电压 Vout：24V（标称）
- 输出电流（最大）：2.5A
- 输出功率：60W
- 转换效率：最高可达 93%
- 隔离电压 Vrms：1.6kV
- 开关频率：310kHz
- 纹波噪声：100mVp-p（典型）
- 最大容性负载：2000µF
三、功能与保护
该模块集成多重保护机制，提高系统可靠性并便于工程设计：
- 欠压保护（UVP）：防止输入电压过低导致异常工作
- 过压保护（OVP）：输出电压异常升高时动作
- 过流保护（OCP）与短路保护（SCP）：在过流或短路条件下限制输出，支持自动故障恢复（自动重试/复位）
- 自动故障恢复：解除故障后模块可自动恢复供电，减少人工干预
四、热管理与环境适应
- 工作温度范围：-40℃ ~ +105℃，适应恶劣环境与工业级温度要求
- 封装与尺寸：DIP-6，长 50.8mm × 宽 25.4mm × 高 11.8mm，便于通过孔安装与批量生产
- 由于功率密度较高，建议在高输出工况或高环境温度下采取散热板、增强空气对流或降低负载等措施以保证稳定运行
五、应用场景
- 工业控制与自动化设备（PLC、传感器供电）
- 通信与网络设备（基站供电模块、交换设备）
- 车载与移动电源系统（适配 12V/24V 电源轨）
- 仪器仪表、测试设备和嵌入式系统电源隔离与稳压 模块的小体积、高效率与高隔离电压使其在需要信号隔离、噪声抑制与安全防护的系统中非常适用。
六、实用设计建议
- 输入侧应加足够的滤波电容，防止输入纹波和瞬态过压；推荐使用低 ESR 电解或固态电容
- 输出侧建议并联低 ESR 电容（最大不超过 2000µF），既能降低纹波，也能保证瞬态响应；过大容性负载会影响稳定性
- 布局时确保输入与输出端的接地回路短且粗，减小 EMI 与导通阻抗
- 建议在输入端增加保险丝或热熔断器，以及必要的 TVS 抑制器以增强系统防护
- 若工作在靠近温度极限区间，应考虑降额使用或强制风冷
七、选型与可靠性说明
- 若系统需更高隔离电压或更大输出功率，请根据具体需求选择更高规格产品；同一系列可提供不同电压/功率选项
- 模块通过严格校验并具备多重保护，适合长期运行的工业环境；为保证长期可靠性，建议参考厂商的应用手册进行温升与热沉设计
总结：URB2424LD-60WR3 以其宽输入、24V/2.5A 输出、高达 93% 的效率、1.6kVrms 隔离及全面的保护功能，成为工业、通信与车载等领域的理想隔离 DC-DC 电源模块。若需原理图建议、典型应用电路或更详细的电气特性曲线，可进一步提供以便给出针对性的设计支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
