Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLPTEC MGJ2D241509SC
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YLPTEC MGJ2D241509SC
- Type
- YLPTEC
- Minimum package
- 25 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YLPTEC
- Electronic Component
- MGJ2D241509SC
- Electronic Component
- 1
- Electronic Component
- 9.8mm
- Package
- SIP-5
- Type
- Electronic Component
- Electronic Component
- Isolated Power Supply Module
- Electronic Component
- 6.04g
- Electronic Component
- 19.5mm
- Electronic Component
- 12.5mm
- Electronic Component
- 1
- Electronic Component
- BM0264771662
- Operating Temperature
- 40℃~+105℃
- Switching Frequency
- 100Hz
- Electronic Component
- 100mVp-p
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MGJ2D241509SC 产品概述
一、概述
MGJ2D241509SC 是 YLPTEC（易川）面向 IGBT 驱动器专用的双路塑封型 DC-DC 模块。模块采用非对称输出设计，可同时提供一路负压（-8.7V）和一路正压（15V），以尽可能降低 IGBT 驱动损耗并提高开关可靠性。产品体积小、转换效率高、具备短路保护与自动恢复功能，适配工业级环境。
二、主要规格与参数
- 类型：塑封型（SIP-5）
- 输入电压 Vin：23.3V ～ 24.7V
- 输出通道：2 路（-8.7V / 15V）
- 输出电流（最大）：-8.7V @ 40mA；15V @ 80mA
- 最大容性负载：220µF（任一输出）
- 转换效率：约 90%
- 隔离耐压 Vrms：3000V
- 开关频率：100Hz
- 纹波噪声：100mVp-p
- 工作温度范围：-40℃ ～ +105℃
- 外形尺寸（L×W×H）：19.5 × 9.8 × 12.5 mm
三、功能与特性
- 非对称双输出：为 IGBT 驱动提供专用的负/正驱动电压，降低栅极驱动功耗与器件应力。
- 短路保护与自动恢复：输出短路或过载时自动限制并在故障解除后恢复正常工作，提升系统容错能力。
- 高隔离：3kVrms 隔离等级适合电机控制与变频器等工业应用对安全隔离的需求。
- 低纹波与较大容性驱动能力：支持高达 220µF 的容性负载，配合 100mVp-p 纹波指标，满足驱动端瞬态要求。
- 宽工作温度：-40℃ 到 +105℃，适应严苛现场环境。
四、典型应用
- 通用变频器（IGBT 驱动）
- 交流伺服驱动系统
- 电焊机控制模块
- 不间断电源（UPS）及工业电源子模块
五、安装与热管理建议
- 建议将模块垂直或平放于良好散热的印制板上，周围留足通风空间。
- 模块效率高、损耗小，但在高控温环境或并联多模块时仍应考虑适当散热与温度监测。
- 输出端建议并联一组低等效串联电阻（ESR）合适的电解电容与陶瓷旁路电容：电解电容用于稳态能量储存，陶瓷电容用于抑制高频纹波。电容应靠近输出引脚布局以降低寄生感抗。
- 输入侧建议使用合适的滤波器与熔断保护元件以提高系统安全性。
六、使用注意事项
- 确认输入电压在 23.3V～24.7V 范围内，避免长期超压或欠压工况。
- 负载不要超过额定电流与最大容性负载限制，避免长期推动大容性负载造成应力。
- 在隔离边进行高压检测或接地实验时请遵守安全规范，隔离耐压为 3kVrms，非绝对耐压保证，实际应用中请按系统要求留有裕度。
- 如需并联或级联使用，请咨询厂商确认兼容性与并联方案。
MGJ2D241509SC 针对 IGBT 驱动的专用设计在效率、保护与体积方面取得平衡，适合工业驱动系统的小型化、可靠化需求。若需更详细的电气特性曲线、典型接线图或样品评估，可联系 YLPTEC（易川）技术支持获取完整资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
