Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YLPTEC B0515S-3WR2 B0515S
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YLPTEC B0515S-3WR2
- Type
- YLPTEC
- Minimum package
- 25 管
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YLPTEC
- Electronic Component
- B0515S-3WR2
- Electronic Component
- 1
- Electronic Component
- 10.16mm
- Package
- SIP,19.7x7mm
- Electronic Component
- Isolated Power Supply Module
- Electronic Component
- 3.559g
- Electronic Component
- 19.65mm
- Electronic Component
- 7mm
- Electronic Component
- 1
- Features
- Electronic Component
- Electronic Component
- BM0265023113
- Operating Temperature
- 40℃~+85℃
- Switching Frequency
- 250kHz
- Electronic Component
- 80mVp-p
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
B0515S-3WR2 隔离电源模块 产品概述
一、产品简介
B0515S-3WR2 是 YLPTEC(易川) 推出的高效隔离直流-直流模块，SIP-4 封装，体积小巧（约19.65 × 10.16 × 7 mm），适用于空间受限的工业与仪表场合。该模块输入电压 4.5–5.5V，单路隔离输出 15V，额定输出功率 3W，最高输出电流 200mA，转换效率高达 88%，并提供 1.5kV rms 的输入-输出隔离能力。
二、主要电气参数
- 输入电压：4.5V ～ 5.5V
- 输出电压：15V（单路）
- 额定功率：3W
- 最大输出电流：200mA
- 转换效率：典型 88%
- 开关频率：250kHz
- 纹波噪声：80mVp-p（典型）
- 最大容性负载：560µF
- 隔离电压：1.5kV rms
三、可靠性与保护特性
模块支持短路保护，工作温度范围广（-40℃ 至 +85℃），适合工业级应用环境。短路保护可在异常工况下限制输出故障，但建议在设计中仍采取适当的输入保险与外部保护电路以确保系统可靠性。
四、机械与封装
- 封装形式：SIP（单列直插）
- 外形尺寸：长 19.65mm × 宽 10.16mm × 高 7mm（典型）
- 安装便捷，适合通过孔板或槽位固定，利于模块化设计与快速装配。具体引脚排列与安装尺寸请参照厂家数据手册以保证兼容性。
五、典型应用场景
适用于工业控制、通信设备、电源隔离、仪表信号调理、传感器驱动以及需要输入/输出隔离的小功率模块化电源。特别适合对体积、隔离与效率有综合要求的嵌入式系统。
六、设计与使用建议
- 输出端按需并联适当的低等效串联电阻（ESR）电容以抑制纹波，但注意不超过 560µF 的容性负载上限；
- 输入端增加滤波与反向保护，必要时使用输入保险丝；
- 若工作在高温或近额定功率长时间运行，需考虑散热与降额使用；
- 具体引脚定义、启动特性与短路恢复模式请以官方规格书为准，量产前建议进行可靠性与电磁兼容性验证。
如需完整电气图、引脚图或样片测试报告，可进一步索取 YLPTEC 官方资料以便设计落地。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
