Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YANGJIE SMBJ26CA
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- YANGJIE SMBJ26CA
- Type
- DO-214AA(SMB)
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YANGJIE
- Electronic Component
- SMBJ26CA
- Electronic Component
- 1
- Package
- DO-214AA(SMB)
- Electronic Component
- 0.22g
- Electronic Component
- 1
- Electronic Component
- BM0228055113
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SMBJ26CA 产品概述
一、产品简介
SMBJ26CA 是扬杰（YANGJIE）推出的一款双向瞬态抑制二极管（TVS），用于保护电子设备免受雷击、浪涌和瞬态电压干扰。该器件采用 SMB（DO-214AA）封装，具备高能量吸收能力与宽工作温度范围，适用于工业、通信与汽车电子等场景的浪涌保护。
二、主要电气参数
- 极性：双向
- 反向截止电压 Vrwm：26 V
- 钳位电压 Vcl：42.1 V（典型）
- 峰值脉冲电流 Ipp：14.3 A（10/1000 μs）
- 峰值脉冲功率 Ppp：600 W（10/1000 μs）
- 击穿电压 Vbr：31.9 V
- 反向漏电流 Ir：5 μA（常温）
- 工作温度范围：-55 ℃ ~ +150 ℃
- 类型：TVS 双向
- 封装：SMB（DO-214AA）
- 品牌：YANGJIE（扬杰）
三、性能特点
- 高能量吸收：Ppp 达到 600 W（10/1000 μs），能承受较大浪涌冲击，适合电源线路和信号线的瞬态保护。
- 低钳位电压：钳位电压 42.1 V，有效限制过电压对后端器件的损害。
- 低漏电流：常温下反向漏电流仅 5 μA，降低对电路静态功耗的影响。
- 宽温度适应性：-55 ℃ 至 +150 ℃ 的工作温度，适合恶劣环境使用。
- SMB 封装：便于自动贴装，适合常见 PCB 布局和替换。
四、典型应用
- 电源输入保护（适配器、开关电源输入端）
- 通信线路浪涌保护（以太网、基站设备、防雷）
- 汽车电子系统瞬态抑制（线束、电控单元周边）
- 工业控制与仪器仪表的过压保护
- 消费电子的端口与外设保护
五、设计与使用建议
- 布局靠近被保护器件：将 SMBJ26CA 放置于靠近接口或电源入口处，尽量减少引线长度以降低寄生电感。
- 考虑散热与焊接工艺：大功率冲击下会产生热量，确保 PCB 有良好散热路径；按厂家推荐的回流焊工艺安装。
- 与熔断器/限流元件配合：在需要更高安全裕度的场合，可与熔断器或限流电阻串联使用以避免重复冲击损坏。
- 检验耐冲击能力：实际应用中可根据环境与标准（如 IEC/EN 抗雷击规范）进行浪涌测试验证。
六、选型与注意事项
- 若系统为单向保护，请选择单向型 TVS；SMBJ26CA 为双向型号，适合交流或双向脉冲场合。
- 注意工作电压与被保护电压匹配，Vrwm（26 V）应高于正常工作电压并低于被保护器件的最大承受电压。
- 对于长时间重复冲击或更高能量需求，应评估更大封装或并联使用的可行性，并关注寿命与可靠性指标。
总结：SMBJ26CA 以其高能量吸收、低泄漏和宽温适应性，在中高能量的瞬态抑制应用中表现稳健，是一款成本效益较高的双向 TVS 保护器件。若需用于关键系统，建议结合实际浪涌规格与生产验证进行最终确认。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
1 Piece M92T36 BGA Integrated Circuit Chipset PI3USB BQ24193 P13USB PI3USB30532ZLE P13USB30532ZLE
- Model
- M92T36
- Package
- UQFN-40-EP(5x5) / WQFN-40-EP(3x6) / VQFN-24-EP(4x4)
