Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Walsin 0805X226M6R3CT
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
18
specifications
Core information
- Product name
- (Walsin) 0805X226M6R3CT
- Type
- WALSIN
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- (WALSIN)
- Electronic Component
- 0805X226M6R3CT
- Electronic Component
- 1
- Electronic Component
- 22uF
- Package
- 0805
- Electronic Component
- SMD Capacitor(MLCC)
- Electronic Component
- ±20%
- Electronic Component
- 0.034g
- Electronic Component
- 1
- Electronic Component
- BM0264255110
- Electronic Component
- X5R
- Voltage
- 6.3V
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
0805X226M6R3CT陶瓷电容器产品概述
一、产品核心标识与基础参数
0805X226M6R3CT是华新科（Walsin） 推出的多层陶瓷电容器（MLCC），型号命名直接映射关键性能，核心参数如下：
参数项 规格值 备注 标称容值 22μF 22×10⁶ pF（编码“X226”） 容值精度 ±20% 精度等级“M”标识 额定电压 6.3V DC 直流工作电压上限 温度特性 X5R 行业标准介质特性 封装 0805（2012公制） 英制封装对应公制2012尺寸型号后缀“CT”为华新科商业级MLCC的系列标识，适配常规消费电子/工业低电压场景。
二、封装与物理尺寸
该产品采用0805表面贴装封装，是消费电子领域的主流小尺寸封装，物理尺寸（典型值）：
- 长度：2.0±0.2mm；
- 宽度：1.2±0.2mm；
- 厚度：0.8±0.1mm（部分批次厚度为0.75±0.05mm，以官方datasheet为准）。
封装优势
- 空间节省：紧凑体积适配高密度PCB设计（如智能手机主板、TWS耳机充电盒）；
- 高频性能：无引线结构降低寄生电感/电阻，提升信号传输效率；
- 焊接兼容：支持回流焊（峰值温度260℃±5℃，时间≤10s）、波峰焊，符合自动化生产要求。
三、电气性能与温度稳定性
3.1 核心电气参数
- 容值偏差：25℃/6.3V DC条件下，容值波动≤±20%（M档）；
- 损耗角正切（tanδ）：1kHz/1Vrms测试下，典型值≤0.15%，低损耗减少能量损耗；
- 漏电流：额定电压下（6.3V DC），25℃时≤10μA（1分钟测试），满足低功耗设计；
- 直流偏置特性：X5R介质偏置稳定性优于Y5V，6.3V电压下容值衰减≤10%（典型值），避免偏置导致的滤波性能下降。
3.2 X5R温度特性
X5R是MLCC常用介质，温度特性明确：
- 工作温度范围：-55℃至+85℃；
- 温度容值波动：≤±15%（相对于25℃基准值），适合户外便携设备（如运动手环、户外蓝牙音箱）的温度变化场景。
四、典型应用场景
该产品的封装、容值与电压组合，主要适配低电压、小体积、高密度设备：
- 便携消费电子：智能手机/平板电脑的电源滤波（电池供电回路、USB接口）、蓝牙/WiFi模块信号耦合；
- 可穿戴设备：智能手表/手环的电源旁路（降低电源噪声）、传感器信号耦合；
- 小型配件：TWS无线耳机充电盒滤波、便携充电器EMI滤波；
- 工业低电压场景：小型PLC输入输出模块滤波、传感器节点电源稳定。
五、品牌与可靠性优势
华新科作为全球MLCC领先厂商，该产品具备以下可靠性：
- 环保合规：符合RoHS 2.0、REACH SVHC要求，无铅无卤；
- 可靠性测试：通过高温寿命测试（125℃/6.3V，1000小时容值变化≤±10%）、温度循环测试（-55℃~+85℃，1000循环）；
- 批量一致性：生产工艺稳定，批量产品参数偏差小，适合大规模自动化生产。
注意：实际应用需参考华新科官方datasheet，确认存储条件（常温干燥，湿度≤60%）、焊接曲线等细节。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
