Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
UNI-ROYAL 1206W4F1500T5E
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- UNI-ROYAL 1206W4F1500T5E
- Type
- UNI-ROYAL
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 250mW
- Electronic Component
- Electronic Component
- Electronic Component
- UNI-ROYAL
- Electronic Component
- 1206W4F1500T5E
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.03g
- Electronic Component
- 150Ω
- Electronic Component
- 1
- Electronic Component
- BM0257341637
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 200V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
1206W4F1500T5E 产品概述
一、产品简介
1206W4F1500T5E 为 UNI-ROYAL（厚声）系列厚膜贴片电阻，封装为 1206（3216公制）。标称阻值 150Ω，精度 ±1%，额定功率 250mW，最高工作电压 200V，温度系数（TCR）±100ppm/℃，工作温度范围 -55℃ 至 +155℃。该器件以良好的温度稳定性和通用适配性，适合各类电子设备的信号与限流场合。
二、主要电气与环境参数
- 阻值：150Ω（厚膜）
- 精度：±1%（F级）
- 额定功率：250mW（环境温度下标称值）
- 最大工作电压：200V
- 温度系数：±100ppm/℃（典型）
- 工作温度：-55℃ ~ +155℃
- 封装：1206 SMD（尺寸约 3.2mm × 1.6mm）
- 品牌：UNI-ROYAL（厚声）
三、性能特点
- 稳定性好：厚膜工艺结合严格筛选，长期漂移小，适合一般工业与消费类应用。
- 宽温度适应性：-55℃ 至 +155℃ 的工作温度，适合高低温环境使用。
- 通用电压承受能力：200V 的工作电压上限可满足多数电源与接口电路需求。
- 尺寸与安装：1206 封装兼容常见贴片工艺，适用于自动贴装与回流焊流程。
四、应用场景
- 工业控制与电源模块中的分压、限流与阻抗匹配；
- 仪器仪表和测量放大电路对高精度电阻的需求；
- 通信设备与终端、消费类电子的通用电阻应用；
- 汽车电子（视系统可靠性要求和认证情况而定）。
五、使用与装配建议
- 回流焊推荐按照通用无铅工艺曲线，峰值温度不超过 260℃，请参考厂商具体回流曲线并控制热循环次数；
- 高温环境下需考虑功率降额，建议在 >70℃ 时按线性或厂商提供的降额曲线进行功率调整；
- 贴片基板焊盘设计应兼顾可靠焊接与散热，遵循 1206 标准 PCB 尺寸规范；
- 储存请避光、干燥并防潮，开卷后建议尽快使用或按防潮要求保管。
六、可靠性与质保
该系列产品通过常规可靠性测试（温度循环、湿热、焊接热冲击等），适配商业与工业类应用。具体寿命与失效率请参照厂商完整数据表与质量保证条款，量产前建议进行样件验证测试以满足系统级要求。
若需样品、详细数据表或包装/最小起订量信息，可提供订单型号与用途，便于推荐最合适的包装形式与供货方案。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
