Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TAXM16M4RLBCCT2T
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YJX TAXM16M4RLBCCT2T
- Type
- YJX
- Minimum package
- 3000 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YJX
- Electronic Component
- TAXM16M4RLBCCT2T
- Electronic Component
- 1
- Package
- SMD3225-4P
- Electronic Component
- Passive Crystal Oscillator
- Electronic Component
- 0.05g
- Frequency
- 16MHz
- Electronic Component
- 1
- Electronic Component
- BM0232103639
- Operating Temperature
- 40℃~+85℃
- Electronic Component
- ±10ppm
- Crystal Oscillator Type
- SMDCrystal Oscillator
- Load Capacitor
- 20pF
- Frequency
- ±15ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TAXM16M4RLBCCT2T无源贴片晶振产品概述
一、产品基本信息
TAXM16M4RLBCCT2T是雅晶鑫（YJX）品牌推出的无源贴片晶振，属于通用时钟基准器件。其封装型号为SMD3225-4P（3.2mm×2.5mm表面贴装4引脚封装），体积紧凑，适配自动化生产流程。作为无源晶振，该产品无需额外供电，需配合外部振荡电路（如MCU内置振荡器）实现时钟信号输出，结构简单且可靠性高。
二、核心电气参数详解
该晶振的关键参数决定了其适用场景，具体如下：
- 频率特性：标称频率为16MHz（电子设备常见时钟基准）；常温（25℃）频差±10ppm，可满足消费电子、工业控制的基础精度需求；全温区（-40℃~+85℃）频率稳定度±15ppm，即温度变化时频率偏移不超过±15ppm，保证宽温环境下的时钟稳定性。
- 负载电容：推荐负载电容20pF。无源晶振的振荡频率受外接电容影响，设计电路时需在晶振引脚与地之间并联20pF左右陶瓷电容，匹配负载特性以确保输出频率准确。
- 等效串联电阻（ESR）：ESR为40Ω，属于无源晶振合理范围。较低ESR可降低起振功耗，提升振荡电路抗干扰能力，避免起振困难或频率不稳定。
- 工作温度范围：覆盖-40℃至+85℃，符合工业级温区要求，可在户外、低温仓库、高温车间等温差场景稳定工作，无需额外温控组件。
三、封装与物理特性
TAXM16M4RLBCCT2T采用SMD3225-4P封装，尺寸约3.2mm（长）×2.5mm（宽）×0.8mm（厚），属于小型化贴片封装，适合便携式或紧凑型设备。4引脚布局符合标准规范，引脚间距均匀，便于PCB设计和自动化贴装，焊接无引线断裂风险，提升生产良率。
四、典型应用场景
基于参数特性，该晶振适用于以下场景：
- 单片机/MCU系统：为8位、32位MCU（如STM32、51系列）提供16MHz基准时钟，满足数据处理、通信时序需求；
- 低功耗通信模块：蓝牙（BLE）、WiFi、LoRa等无线模块的时钟参考，宽温区适应户外物联网节点；
- 消费电子设备：智能家居（智能插座、温湿度传感器）、小型家电（智能电饭煲控制器）的时钟电路，体积小易集成；
- 工业控制组件：工业传感器、PLC模块的辅助时钟，耐受极端温度，保证设备稳定运行。
五、产品优势总结
该无源晶振具有以下实际优势：
- 宽温适应性：覆盖工业级温区，降低系统设计复杂度；
- 频率稳定性：常温频差和全温稳定度满足多数设备需求，避免通信错误或时序混乱；
- 低功耗与高可靠性：40Ω低ESR减少起振功耗，无源结构降低故障点；
- 易集成性：SMD3225-4P封装适配自动化贴装，适合小型化设备批量生产。
该产品凭借紧凑封装、稳定性能和宽温适配性，成为消费电子、工业控制等领域的通用时钟基准选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
