Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TAXM32M2QLFCDT1T
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YJX TAXM32M2QLFCDT1T
- Type
- YJX
- Minimum package
- 1000 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YJX
- Electronic Component
- TAXM32M2QLFCDT1T
- Electronic Component
- 1
- Package
- SMD5032
- Electronic Component
- Passive Crystal Oscillator
- Electronic Component
- 0.131g
- Frequency
- 32MHz
- Electronic Component
- 1
- Electronic Component
- BM0264498445
- Operating Temperature
- 40℃~+85℃
- Electronic Component
- ±30ppm
- Crystal Oscillator Type
- SMDCrystal Oscillator
- Load Capacitor
- 20pF
- Frequency
- ±20ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TAXM32M2QLFCDT1T 产品概述
一、产品简介
TAXM32M2QLFCDT1T 是雅晶鑫（YJX）全国产贴片晶振，标称频率 32.000MHz，封装为 SMD5032（约 5.0 × 3.2 mm）。该器件面向各类微控制器、通信模块、射频前端及精密时钟系统，提供稳定、高可靠的参考时钟源。
二、主要特性
- 频率：32 MHz（标准值）
- 常温频差：±30 ppm
- 频率稳定度（随温度/老化等）：±20 ppm
- 负载电容：20 pF
- 等效串联电阻（ESR）：30 Ω（典型）
- 工作温度范围：-40 ℃ ~ +85 ℃
- 封装：SMD5032，贴片封装，适配自动贴装与回流焊工艺
三、典型电气与机械参数
- 输出类型：晶体谐振元件，需与振荡器电路配合使用
- 推荐负载电容配置：为保证总等效负载约为 20 pF，考虑 PCB 寄生电容（2–5 pF），每侧并联电容通常取 30–36 pF（具体以振荡器 IC 要求为准）
- 建议使用温和回流温度曲线，避免急冷急热
四、应用场景
适用于：蓝牙/无线模块时钟、MCU 系统时钟、嵌入式设备、工业自动化控制器、GPS/定位前端以及其它需要 32 MHz 精确参考频率的场合。
五、封装与装配建议
SMD5032 小型贴片，建议在焊盘设计时留出足够的地回路和旁路电容空间，晶振与敏感模拟线或高频线保持距离，减少杂散耦合。常见出厂包装为贴片带卷（Tape & Reel），便于 SMT 贴装。
六、可靠性与质量控制
雅晶鑫生产过程符合电子元器件行业标准，材料选型与老化筛选严格。出货前建议用户对整机环境温度范围、振荡器驱动电平及长期老化做样机验证，以确保长期频率稳定性满足系统需求。
七、使用注意事项
- 晶振为被动元件，需与目标振荡器电路匹配；驱动功率过大可能引起频率漂移或损伤。
- 在布局时减小引脚到地的走线长度，避免接近高频或大电流回路。
- 对于对频率精度要求极高的设计，建议在样机阶段进行温度循环与老化测试。
如需样品、技术资料或量产包装信息，请注明料号 TAXM32M2QLFCDT1T 与预计用量，雅晶鑫可提供进一步支持与检验数据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
